Cornick Help Center

    WD1200 - USB WiFi Adapter

    March 11th, 2022

    How to Connect a USB WiFi adapter to an NVR

    1. Connect the adapter to the USB port on the NVR.
    2. Press OK on the prompt "Are you sure you want to go to the corresponding interface now?
    3. Enable the Connect Automatically switch.
    4. Double Click on the WiFi network you want to connect too.
    5. Enter your WiFi password in the Connection Password box.
    6. Press Connect, and wait for the IP Address, Subnet Mask and Default gateway options to fill themselves in.
    7. Press OK.
    8. Press Apply, then press Back.
    9. Your device is now connected to WiFi.
    Delete

    Info

    Please note that whenever the NVR is rebooted the prompt "Are you sure you want to go to the corresponding interface now?" will appear. Press "Cancel" to dismiss this prompt, as your device will automatically reconnect to the WiFi.

    Delete

    Modifying WiFi Settings

    1. Right-click and press Main Menu.
    2. Go to Network.
    3. Select WiFi.
    4. Enable the Connect Automatically switch.
    5. Double Click on the WiFi network you want to connect too. 
    6. Enter your WiFi password in the Connection Password box.
    7. Press Connect, and wait for the IP Address, Subnet Mask and Default gateway options to fill themselves in.
    8. Press OK.
    9. Press Apply.
    10. Your device is now connected to WiFi.
    Delete

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support