Cornick Help Center

    Email Notifications

    Configuring SMTP

    SMTP Email Setup

    (Black GUI) Setup

    1. Navigate to Main Menu > Network > Email
    2. Tick Enable.
    3. Enter your SMTP server and Port. Alternatively, you can google your email provider with SMTP, eg, “Bigpond smtp settings”
    4. Enter your Email address and Password into the Username and Password fields
    5. Input a different address for sender and receiver as they cannot be the same.
    6. Enter an email Subject.
    7. Select the encryption type, depending on your email provider, they may use different settings.
    8. Click Apply.

    Info

    Click Test at the bottom to verify the server connection. If the test fails and you have used port 465 and SSL, try 587 and TLSIf the test still fails check the correct SMTP settings from your email provider.


    (Blue GUI) Setup

    1. Navigate to Main Menu > Network > Email
    2. Tick Enable.
    3. Enter your SMTP server and Port. Alternatively, you can google your email provider with SMTP, eg, “Bigpond smtp settings”
    4. Enter your Email address and Password into the Username and Password fields
    5. Input a different address for sender and receiver as they cannot be the same.
    6. Enter an email Subject.
    7. Select the encryption type, depending on your email provider, they may use different settings.
    8. Click Apply.

    Info

    Click Test at the bottom to verify the server connection. If the test fails and you have used port 465 and SSL, try 587 and TLSIf the test still fails check the correct SMTP settings from your email provider.

    Extra Steps for Gmail Account

    Google has updated its account security policy to block all third-party apps that only use account name and password to log in to your Google account. The below steps will allow you to make a separate "App Password" which you will can in the NVR in place of your account password.

    1. Using your phone/computer, log into your Gmail account, then click the Account Icon at the top right.
    2. Select Manage your Google Account.
    3. Select Security from the list on the left. If 2-Step Verification is already listed as "On", skip to Step 5. If 2-Step Verification is listed as "off", click the arrow to the right of 2-Step Verification.

    4. Select Get Started and then follow through all the steps to setup 2-Step Verification for your Gmail account.
    5. Confirm that 2 Step Verification is listed as "On", then select the arrow to the right of App Passwords.

    6. Click Select App, then select Mail from the drop-down.
    7. Click Select Device, Then select Other (Custom name) from the drop-down.
    8. Click on the field and type in the desired name (e.g "VIP NVR"), then select Generate.

    9. Take note of the unique password that has now been generated for use with your NVR.

    Once these steps have been completed, follow the steps below using the new "App Password" instead of your email account password.

    Delete

    Common SMTP Provider Settings

    Provider SMTP Server  Port 
    Gmail smtp.google.com (OLD)
    smtp.gmail.com (NEW)
    SSL = 465  or  TLS = 587
    Yahoo smtp.mail.yahoo.com SSL = 465  or  TLS = 587
    Hotmail smtp-mail.outlook.com SSL = 465  or  TLS = 587
    Telstra smtp.telstra.com SSL = 465  or  TLS = 587

    Configuring Events to Send Emails

    Once your SMTP settings have been configured you will need to enable the Send Email option for the event you wish to receive emails for. E.g Motion Detection, or IVS.

    Black GUI IVS Rule Example

    Click the Trigger Button to bring up the Trigger menu, configuring what actions are taken once the event is triggered

    AI Trigger Actions Explained

    1. Period - Sets the times of day that the event will trigger (always on by default).
    2. Alarm Out - Sets an external alarm to activate whenever a face is detected.
    3. Latch Time - Sets how long the system waits after a trigger before detecting again (10 seconds by default).
    4. Alarm Upload - Updates the alarm system status on the network (Unused for this system).
    5. Send Email - Notifies a specified email address whenever the event is triggered (Requires internet connection & setup)
    6. Record Channel - Sets which camera to record to when the event is triggered.
    7. Post-Record - Sets the amount of time recorded after the event is triggered.
    8. PTZ Activation - Set PTZ behaviors in response to a event trigger, such as selecting a Tour to perform, etc (For use with PTZ camera(s) only). 
    9. Buzzer - Sets the NVR to beep whenever an event is triggered
    10. Voice Prompts - Plays a designated .wav file in response to an event trigger. This can be imported via a USB flash drive to the NVR.

    Blue GUI Motion Detection Example

     

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support