Cornick Help Center

    Programming Onboard Output 1 or 2 on the 8 Zone Expander Module (WGAP864EXP1664) as a "DOOR CHIME"

    September 30th, 2021

    https://www.rhinoco.com.au/product/WGAP864EXP1664

     

    1- Programming Location PRM 1 or 2 to Chime Output

    [*] [1479] = installer code

    [*] 

    [413] = Chime O/P  

    [*] = Sub 1 = Partition 1 - Data 00 = None Output

    Press [06] = Data Output 1 of the Zone Expander 1 

    [*] = Confirmation

    OR EITHER

    Press [07] Data Output 2 of the Zone Expander 1

    [*] = Confirmation

    [#] = Installer Menu


    2- Programming [Zone X] activates the Chime Pulse Output for 3 seconds

    [10X] = Zone X 

    [*] = Zone Bitmap X - Data 1 [N]

    Keep press [Panic>>] = Select Zone Property

    Until [Data 5 N] = Data Enable Chime Zone

    [*] = Changing [N] to [Y]

    [#] [#] = Confirmation 

     

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support