Cornick Help Center

    Camera Time Sync Issues

    August 12th, 2020

    If your camera time is drifting, it may be because the time on the recorder is set incorrectly. Follow the steps below to rectify the issue.

    Setting the Time and Changing the Camera Sync Interval - Black GUI

    1. Right click and select Main Menu, select System, then Date & Time.

    2. Ensure the date and time, DST (if applicable in your state/territory), and NTP is setup. In Australia, the NTP server is au.pool.ntp.org

    3. Select the Save button after setting the time, then select Apply.

    3. Select the Basic tab. Ensure CAM Time Sync is enabled, and the interval is set to 1. This means the recorders time will synchronise with the camera's every 1 hour. Select Apply.

    Setting the Time and Changing the Camera Sync Interval - Blue GUI

    1. Right click and select Main Menu, select System, then Date & Time.

    2. Ensure the date and time, DST (if applicable in your state/territory), and NTP is setup. In Australia, the NTP server is au.pool.ntp.org

    3. Select the Save button after setting the time, then select Apply.

    3. Select the General tab. Set the IPC Time Sync Interval to 1. This means the recorder's time will synchronise with the cameras every 1 hour. Select OK.




    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support