Cornick Help Center

    How to add Unlock Codes and Cards/Keyfobs

    For Door Stations on SIP Firmware

    Cards/Keyfobs

    Swipe Cards and keyfobs can be used to unlock Door Stations with a built in card reader.

    Learning in Cards/Keyfobs - Option 1 (Newer Firmware)

    Delete

    Info

    If you do not have Personnel Management under Household setting, please use option 2.

    1. Navigate to Household Setting Personnel Management.
    2. Click Add.
    3. Enter a Personnel Number (Must be unique) and the Room No. of the Room the user will reside in. Then click Save.
    4. Click the Card Info Button.
    5. Click Issue Card.
    6. Scan a card/keyfob on the card reader, then enter a Name and click Save. Repeat for each card/keyfob.
    7. The Card(s) number will show how many cards have been learnt in. Click Confirm Issuing Card before the timer runs out to save the cards.
    8. Each card will be displayed in the list.
    Delete

    Learning in Cards/Keyfobs - Option 2 (Older Firmware)

    Delete

    Info

    Room No. Management may be called VTH Management in newer versions of firmware 

    1. Log into the Door Station and Navigate to Household SettingRoom No management.
    2. Click the Modify Pencil for the Monitor you wish to assign the card to.
    3. Click Issue Card.
    4. Scan the Card you wish to learn in on the card reader.
    5. Enter a Username to identify the card, then click Save.
    6. Repeat the process for each card. The Card(s) count will show you how many cards you have waiting to be added.
    7. Once you have added all of your cards, click Confirm Send Card to save the cards, then click Save.

    Unlock Codes

    Unlock codes can be used to unlock Door Stations with a keypad. The Syntax is # <code> # e.g #527481#.

    How to add Unlock Codes

    Info

    If you are missing the Password Manager page your device requires a firmware update.

    1. Log into the Door Station and click on Local Setting > Access Control > Password Manager
    2. Click the Add button.
    3. Enter a Username (ID for who will use the code) and a Password (The Code) and click “OK”.

    Info

    Please note that the password must be 6 digits long.

    The Syntax to enter a code to unlock the door with the keypad is:
    # <User Code> #

    Was this article helpful?

    Send feedback

    Can’t find what you’re looking for?

    Our customer care team is here for you.

    Contact Support